Overview:
The municipal sludge treatment consists of two to four blade shafts, a W-shaped casing with a jacket, a machine base and a transmission part. The entire drying process of the material is carried out in a closed state, and the organic volatile gas and the odor gas are It is sent to the exhaust gas treatment device in a closed atmosphere to avoid environmental pollution.

effect:
To achieve the goal of harmlessness, reduction and resource treatment, municipal sludge must first dry the sludge, and establish a safe and economic sludge drying process is the key to thoroughly and effectively treat the sludge. At present, the relatively mature sludge drying process at home and abroad is heated and dried.

The hot drying of sludge requires a large amount of heat to heat the sludge. When different heat sources are selected, the process route and equipment for sludge drying are greatly different, and the drying operation cost and investment construction cost are seriously affected.

Equipment selection:
The blade sludge drying machine is used for the urban sludge treatment drying project.

• 
  Municipal sludge treatment